Bambu Lab PLA Matte Filament 1.75mm 1kg

Bambu Lab PLA Matte Filament – 25 colours

A velvety, non-reflective PLA that hides layer lines and gives prints a premium, modern look – just as easy to print as regular PLA.

Key features

• Soft matte surface that hides layer lines
• Easy to print and beginner friendly
• Low-emission indoor printing, certified to UL GREENGUARD (UL 2904)
• Biodegradable PLA

Specifications

Compatibility & notes

• Compatible with all AMS units
• Refill needs a Bambu reusable spool

Spool or Refill?

Filament with spool is ready to load. Refill is the same filament without a spool – lower cost and less waste, but it must be fitted onto a Bambu reusable spool before use.

Printing & storage tips

• Keep filament dry – dry it before use if the spool has been open for a while, and store it sealed with desiccant.
• Print in a well-ventilated room or with filtration.
• Store away from direct sunlight and heat.
• Printed parts are not certified food-safe unless stated by Bambu Lab.

Documents & Downloads

Technical Data Sheet (TDS), Safety Data Sheet (SDS), colour hex codes and compliance reports are published by Bambu Lab on the official product page (Download tab). Printing guides are on the Bambu Lab Wiki.

KSP Electronics is an authorized Bambu Lab reseller.