IoT Projects
ML Projects
Training
Buy 3D Printers, Raspberry Pi & Electronics in Hyderabad
Popular Categories
Featured Products
ESP32-CAM WiFi Bluetooth Development Board with OV2640 Camera Module
In stock
| Weight | 0.02 kg |
|---|---|
| Dimensions | 4.1 × 2.7 × 0.5 cm |
| Model | ESP32-CAM (AI-Thinker) |
| CPU | Dual-core Xtensa LX6, up to 240 MHz |
| Camera | OV2640 2MP (OV7670 compatible) |
| Wi-Fi | 802.11 b/g/n/e/i (2.4 GHz) |
| Bluetooth | 4.2 + BLE |
| RAM | 520 KB SRAM + 4 MB PSRAM |
| Flash | 32 Mbit (4 MB) |
| Storage | MicroSD (TF card) slot |
| Input Voltage | 3.6V – 5V |
| GPIO Pins | 9 |
| Antenna | IPEX + onboard PCB antenna |
| Operating Temp | -20°C to +80°C |
| Security | WPA/WPA2/WPA2-Enterprise/WPS |
| Dimensions | 41 × 27 × 5 mm |
| Compatible IDEs | Arduino IDE, ESP-IDF, MicroPython, PlatformIO |
NodeMcu ESP8266 V3 Lua CH340 Wifi Development Board
In stock
Bluetooth Home Automation for College Students
In stock
1602 (16×2) LCD Display with I2C/IIC interface – Green Backlight
In stock
Arduino UNO R3 ATmega16U2 ATmega328 (DIP)
In stock
ESP32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core (30 PIN)
In stock
| Weight | 0.11 kg |
|---|---|
| Dimensions | 8 × 4 × 10 cm |
| Chipset | ESP32-WROOM-32 |
| CPU | Dual-core Xtensa LX6, up to 240 MHz |
| WiFi | 802.11 b/g/n (2.4 GHz) |
| Bluetooth | Classic BT 4.2 + BLE |
| Flash Memory | 4 MB |
| SRAM | 520 KB |
| GPIO Pins | 30 |
| USB-Serial Chip | CP2102 |
| Operating Voltage | 3.3V |
| ADC | 12-bit, 18 channels |
| DAC | 8-bit, 2 channels |
| Interfaces | SPI, I2C, I2S, UART, PWM, Touch |
| Compatible IDEs | Arduino IDE, MicroPython, ESP-IDF, PlatformIO |
3D Printers
Bambu Lab A1 3D Printer | Auto Calibration | High-Speed Desktop 3D Printer
In stock
| Weight | 12 kg |
|---|---|
| Dimensions | 60 × 54 × 33 cm |
| Build Volume | 256 × 256 × 256 mm |
| Max Bed Temp | 100 °C |
| Supported Filaments | PLA, PETG, TPU, PVA: Ideal | ABS, ASA: Not recommended | PA, PC, PET: Not recommended | CF/GF: Not recommended |
| Shell Materials | Steel + Extruded Aluminum |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Stainless Steel |
| MC Board Cooling Fan | No |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | N/A |
| Air Filter | N/A |
| Filament Sensors | Run Out: Yes | Odometry: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | Low Rate (up to 1080P) | Timelapse Supported |
| Software Updates | Bugfixes until Dec 14, 2028 | Security until Dec 14, 2030 |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s² |
| Physical Dimensions | 385 x 410 x 430 mm³ |
| Net Weight | 8.3 kg |
| Max Nozzle Temp | 300 °C |
| Frame Design | Dual Z-Axis (Gantry) |
| Multi-Color Support | Yes (AMS Lite) |
| Display Screen | 3.5-inch 320×240 IPS Touch Screen |
| Connectivity | Wi-Fi, Bambu-Bus |
Bambu Lab A2L Combo 3D Printer | Extra Large Build Volume | AMS Multi-Color
In stock
| Weight | 18 kg |
|---|---|
| Dimensions | 62 × 56 × 48 cm |
| Build Volume | 330 × 320 × 325 mm |
| Physical Dimensions | 544 × 529 × 505 mm |
| Net Weight | 12.8 kg |
| Max Nozzle Temp | 300 °C |
| Max Bed Temp | 80 °C |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s² |
| Nozzle Material | Stainless Steel |
| Extruder Gears | Hardened Steel |
| Shell Materials | Aluminum & Steel chassis, Plastic frame |
| Supported Filaments | PLA, PETG, TPU, PVA; PLA-CF, PETG-CF (with hardened nozzle) |
| Chamber Camera | Low-frame-rate, up to 1080p, timelapse |
| Filament Sensors | Run-out, Tangle, Odometry & Clumping detection |
| Display Screen | 3.5-inch 240×320 Touchscreen |
| Connectivity | 2.4 GHz Wi-Fi, Bambu-Bus |
| Frame Design | A-series Multi-Tool (with Cutting Module) |
| Software Updates | Bambu Studio (OTA) |
| Model Name | A2L Combo |
| Multi-Color Support | Yes — includes AMS |
Bambu Lab A2L 3D Printer | Extra Large Build Volume | Multi-Tool
In stock
| Weight | 14 kg |
|---|---|
| Dimensions | 60 × 54 × 42 cm |
| Build Volume | 330 × 320 × 325 mm |
| Physical Dimensions | 544 × 529 × 505 mm |
| Net Weight | 12.8 kg |
| Max Nozzle Temp | 300 °C |
| Max Bed Temp | 80 °C |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s² |
| Nozzle Material | Stainless Steel |
| Extruder Gears | Hardened Steel |
| Shell Materials | Aluminum & Steel chassis, Plastic frame |
| Supported Filaments | PLA, PETG, TPU, PVA; PLA-CF, PETG-CF (with hardened nozzle) |
| Chamber Camera | Low-frame-rate, up to 1080p, timelapse |
| Filament Sensors | Run-out, Tangle, Odometry & Clumping detection |
| Display Screen | 3.5-inch 240×320 Touchscreen |
| Connectivity | 2.4 GHz Wi-Fi, Bambu-Bus |
| Frame Design | A-series Multi-Tool (with Cutting Module) |
| Software Updates | Bambu Studio (OTA) |
| Model Name | A2L |
| Multi-Color Support | Multi-Tool (AMS optional) |
Bambu Lab P2S Combo 3D Printer
In stock
| Weight | 14.9 kg |
|---|---|
| Dimensions | 39.2 × 40.6 × 47.8 cm |
| Shell Materials | Plastic, Glass and Steel |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Hardened Steel |
| Max Bed Temp | 110 °C |
| MC Board Cooling Fan | No |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | Activated Carbon Filter |
| Filament Sensors | Run Out: Yes | Grinding Sensor: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | 1920*1080 high-rate | Timelapse Supported |
| Supported Filaments | PLA, PETG, ABS, ASA, TPU, Support for PLA/PETG/ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF: Supported |
| Software Updates | Bugfixes until Oct 14, 2030 | Security until Oct 14, 2032 |
| Physical Dimensions | 392 × 406 × 478 mm³ |
| Net Weight | 14.9 kg |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 20,000 mm/s² |
| Build Volume | 256 × 256 × 256 mm |
| Max Nozzle Temp | 300 °C |
| Frame Design | CoreXY (Fully Enclosed) |
| Display Screen | 5-inch 854×480 Touchscreen |
| Connectivity | Wifi (5G & 2.4G), Bambu-Bus | 8 GB EMMC, USB Port | 2 TOPS NPU |
| Multi-Color Support | Yes (AMS 2 Pro) |
Bambu Lab H2C Combo 3D Printer | Multi-Color High-Speed 3D Printer
In stock
| Weight | 42 kg |
|---|---|
| Dimensions | 59 × 59 × 71 cm |
| Build Volume | Single: 325 × 320 × 320 mm (L) / 305 × 320 × 325 mm (R) | Dual: 300 × 320 × 320 mm | Total: 330 × 320 × 320 mm |
| Physical Dimensions | 492 × 514 × 626 mm |
| Net Weight | 32.5 kg |
| Max Nozzle Temp | 350 °C |
| Max Bed Temp | 120 °C |
| Max Print Speed | 1000 mm/s |
| Max Acceleration | 20,000 mm/s² |
| Nozzle Material | Hardened Steel |
| Extruder Gears | Hardened Steel |
| Shell Materials | Chassis: Aluminum & Steel | Frame: Plastic & Glass | Laser Safety Window (Laser Edition) |
| Supported Filaments | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS; CF/GF reinforced |
| Chamber Camera | Live View 1920×1080 (Timelapse) | Nozzle 1920×1080 | Toolhead 1600×1200 | BirdsEye 3264×2448 (Laser Edition) |
| Filament Sensors | Run Out: Yes | Odometry: Yes (with AMS) | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Display Screen | 5-inch 720×1280 Touchscreen |
| Connectivity | Wi-Fi (5G & 2.4G), Bambu-Bus | 8 GB EMMC, USB Port | 2 TOPS NPU | USB Out 5V/1.5A |
| MC Board Cooling Fan | Closed Loop Control |
| Chamber Regulator Fan | Closed Loop Control |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | G3 + H12 + Coconut-Shell Carbon Filter (VOC & PM filtration) | Air Assist Pump (Laser Edition) |
| Frame Design | Enclosed CoreXY, Dual Nozzle, Heated Chamber |
| Software Updates | Bugfixes until Nov 18, 2030 | Security until Nov 18, 2032 |
| Model Name | H2C Combo |
| Multi-Color Support | Yes — dual nozzle + AMS |
Bambu Lab X2DC 3D Printer with AMS | Multi-Color High-Speed CoreXY
In stock
| Weight | 22.2 kg |
|---|---|
| Dimensions | 39.2 × 40.6 × 47.8 cm |
| Build Volume | 256 × 256 × 260 mm |
| Physical Dimensions | 392 × 406 × 478 mm |
| Net Weight | 16.25 kg |
| Max Nozzle Temp | 300 °C |
| Max Bed Temp | 120 °C |
| Max Print Speed | 1000 mm/s |
| Max Acceleration | 20,000 mm/s² |
| Nozzle Material | Hardened Steel |
| Extruder Gears | Hardened Steel |
| Shell Materials | Plastic, Glass & Metal |
| Supported Filaments | PLA, PETG, ABS, ASA, TPU, PC, PA, PVA, PET; CF/GF reinforced |
| Chamber Camera | Live View (1080p) + Toolhead (1600×1200) |
| Filament Sensors | Run-out, Tangle & Odometry (with AMS) |
| Display Screen | 5-inch 1280×720 Touchscreen |
| Connectivity | Dual-Band Wi-Fi |
| MC Board Cooling Fan | Closed Loop Control |
| Chamber Regulator Fan | Closed Loop Control |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | HEPA H12 + Activated Carbon |
| Frame Design | CoreXY, Dual Nozzle |
| Software Updates | Bambu Studio (OTA) |
| Model Name | X2DC |
| Multi-Color Support | Yes — includes AMS |
Bambu Lab X2D 3D Printer | Next-Gen High-Speed CoreXY
Available on backorder
| Weight | 20.2 kg |
|---|---|
| Dimensions | 39.2 × 40.6 × 47.8 cm |
| Build Volume | 256 × 256 × 260 mm (single) | 235.5 × 256 × 256 mm (dual nozzle) |
| Physical Dimensions | 392 × 406 × 478 mm |
| Net Weight | 16.25 kg |
| Max Nozzle Temp | 300 °C |
| Max Bed Temp | 120 °C |
| Max Print Speed | 1000 mm/s |
| Max Acceleration | 20,000 mm/s² |
| Nozzle Material | Hardened Steel |
| Extruder Gears | Hardened Steel |
| Shell Materials | Chassis: Plastic & Steel | Frame: Plastic, Glass & Metal |
| Supported Filaments | PLA, PETG, ABS, ASA, TPU, PC, PA, PVA, PET; CF/GF reinforced |
| Chamber Camera | Live View (1080p) + Toolhead (1600×1200) |
| Filament Sensors | Run Out: Yes | Odometry: Yes (with AMS) | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Display Screen | 5-inch 1280×720 Touchscreen |
| Connectivity | Wi-Fi (5G & 2.4G), Bambu-Bus | 8 GB EMMC, USB Port | 2 TOPS NPU | USB Out 5V/1.2A |
| MC Board Cooling Fan | Closed Loop Control |
| Chamber Regulator Fan | Closed Loop Control |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | G3 + H12 + Coconut-Shell Carbon Filter (VOC & PM filtration) |
| Frame Design | CoreXY, Dual Nozzle |
| Software Updates | Bugfixes until Apr 14, 2031 | Security until Apr 14, 2033 |
| Model Name | X2D |
| Multi-Color Support | Supported with AMS (sold separately) |
Bambu Lab H2C Combo 2 10W 3D Printer | Multi-Color + 10W Laser
In stock
| Weight | 43 kg |
|---|---|
| Dimensions | 59 × 59 × 71 cm |
| Build Volume | 305 × 320 × 325 mm |
| Physical Dimensions | 492 × 514 × 626 mm |
| Net Weight | 32.5 kg |
| Max Nozzle Temp | 350 °C |
| Max Bed Temp | 120 °C |
| Max Print Speed | 1000 mm/s |
| Max Acceleration | 20,000 mm/s² |
| Nozzle Material | Hardened Steel |
| Extruder Gears | Hardened Steel |
| Shell Materials | Aluminum & Steel chassis, Plastic & Glass frame |
| Supported Filaments | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS; CF/GF reinforced |
| Chamber Camera | Live View, Nozzle, BirdsEye (3264×2448) & Toolhead |
| Filament Sensors | Run-out, Tangle & Odometry (with AMS) |
| Display Screen | 5-inch 720×1280 Touchscreen |
| Connectivity | Wi-Fi (2.4 / 5 GHz) |
| MC Board Cooling Fan | Closed Loop Control |
| Chamber Regulator Fan | Closed Loop Control |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | HEPA H12 + Activated Carbon (G3 pre-filter) |
| Frame Design | Enclosed CoreXY, Dual Nozzle, Heated Chamber |
| Software Updates | Bambu Studio (OTA) |
| Model Name | H2C Combo 2 10W |
| Multi-Color Support | Yes — AMS + 10W laser |
Bambu Lab H2C Combo 2 40W 3D Printer | Multi-Color + 40W Laser
In stock
| Weight | 43 kg |
|---|---|
| Dimensions | 59 × 59 × 71 cm |
| Build Volume | 305 × 320 × 325 mm |
| Physical Dimensions | 492 × 514 × 626 mm |
| Net Weight | 32.5 kg |
| Max Nozzle Temp | 350 °C |
| Max Bed Temp | 120 °C |
| Max Print Speed | 1000 mm/s |
| Max Acceleration | 20,000 mm/s² |
| Nozzle Material | Hardened Steel |
| Extruder Gears | Hardened Steel |
| Shell Materials | Aluminum & Steel chassis, Plastic & Glass frame |
| Supported Filaments | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS; CF/GF reinforced |
| Chamber Camera | Live View, Nozzle, BirdsEye (3264×2448) & Toolhead |
| Filament Sensors | Run-out, Tangle & Odometry (with AMS) |
| Display Screen | 5-inch 720×1280 Touchscreen |
| Connectivity | Wi-Fi (2.4 / 5 GHz) |
| MC Board Cooling Fan | Closed Loop Control |
| Chamber Regulator Fan | Closed Loop Control |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | HEPA H12 + Activated Carbon (G3 pre-filter) |
| Frame Design | Enclosed CoreXY, Dual Nozzle, Heated Chamber |
| Software Updates | Bambu Studio (OTA) |
| Model Name | H2C Combo 2 40W |
| Multi-Color Support | Yes — AMS + 40W laser |
Bambu Lab H2S Combo 2 10W 3D Printer | AMS + 10W Laser
In stock
| Weight | 43 kg |
|---|---|
| Dimensions | 59 × 59 × 71 cm |
| Build Volume | 340 × 320 × 340 mm |
| Physical Dimensions | 492 × 514 × 626 mm |
| Net Weight | 30 kg |
| Max Nozzle Temp | 350 °C |
| Max Bed Temp | 120 °C |
| Max Print Speed | 1000 mm/s |
| Max Acceleration | 20,000 mm/s² |
| Nozzle Material | Hardened Steel (All-Metal Hotend) |
| Extruder Gears | Hardened Steel |
| Shell Materials | Aluminum, Steel, Plastic & Glass |
| Supported Filaments | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS; CF/GF reinforced |
| Chamber Camera | Live View (1080p), Toolhead & BirdsEye (3264×2448) |
| Filament Sensors | Run-out, Tangle & Odometry (with AMS) |
| Display Screen | 5-inch 720×1280 Touchscreen |
| Connectivity | Wi-Fi (2.4 / 5 GHz) |
| MC Board Cooling Fan | Closed Loop Control |
| Chamber Regulator Fan | Closed Loop Control |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | HEPA H12 + Activated Carbon (G3 pre-filter) |
| Frame Design | Enclosed CoreXY, Single Nozzle, Heated Chamber |
| Software Updates | Bambu Studio (OTA) |
| Model Name | H2S Combo 2 10W |
| Multi-Color Support | Yes — AMS + 10W laser |
A big thank you to the KSP Electronics team! ❤️ Recently, a person from KSP Electronics came and assembled my 3D printer. He was very professional, patient, and explained everything clearly while setting it up.
Service and shop are they try understand your problem and resolve it as much as possible
Excellent experience! Bambu A2L arrived in perfect condition with very secure packaging. Setup was quick and hassle-free, and the first print came out beautifully. The printer is fast, quiet, and delivers outstanding print quality. Highly recommended seller! "The seller was responsive and helpful throughout the purchase process. Would definitely buy from them again."
It was a good experience and any kind of custom project they can do it easily and customize it according to use case and shipment also all over india
I recently purchased an electronics project kit from KSP Electronics and overall had a good experience. The ordering process was pretty simple and I didn’t face any issues while placing the order.The product arrived on time and was packed properly. All the components were included and working fine. The quality was decent and it was actually helpful for my project work, especially if you are a student or working on practical assignments.What I liked the most was their communication. I had a couple of small doubts before and after ordering, and their team responded quickly and guided me properly. It made things easier and gave a bit more confidence while purchasing.Would recommend KSP Electronics if you’re looking for project kits. Good experience overall 👍
I wanted my parts for my project and it was very urgent. I got to know about them and I ordered form them the parts are in a very good quality and it was a very fast delivery because of this I completed my Project in time and the prices are very low and reasonable. I would recommend everyone to order from them.
I had a great experience purchasing my Bambu Lab A1 Mini from KSP Electronics. Their response was quick, professional, and seamless throughout the entire process. They answered all my questions promptly, kept me updated, and made the buying experience smooth and hassle-free. The product was genuine and delivered as promised. I highly recommend KSP Electronics to anyone looking for reliable service and excellent customer support.
Excellent service from the KSP service team for my 3D printer! They quickly identified and resolved the issue, explained the root cause clearly, and provided prompt, professional support.
Spoke with Sai and had a great experience. Excellent hospitality, quick communication, and fast delivery. Everything went smoothly from start to finish. Highly recommend!
Good stock maintenance and well knowledgeable staff. Sai Preetham helped me find the components I needed and was very helpful in timely delivery. I recommend KPS ELECTRONICS Hyderabad for all your electronics needs.
I reached out to the shop via WhatsApp and got all my required components delivered via porter app within few hours Service was really good and professional
Bought my first 3D printer from KSP Electronics. They explained basic setup and printing properly
Initially I had doubts while ordering, but products arrived correctly and support was responsive✨
Thanks for delivery and safe handling of the product and I am interested to buy all the required components from you from today
Best place to find all electronic components and 3D printing services for all IoT, electronic modules for industrial and academia
I recently had a great experience with KSP Electronics in Hyderabad. From the moment I visited the store, the staff were welcoming, knowledgeable, and genuinely interested in helping me find the right product. They patiently explained different options, compared features, and didn’t rush me into making a decision 😊 What stood out the most was their transparency in pricing and product details. There were no hidden surprises, and they made sure I understood exactly what I was buying. The product quality was excellent, and everything was well organised in the store, making it easy to browse. Their customer service didn’t stop at the purchase—they also guided me on installation and usage, which was really helpful. Overall, KSP Electronics is a reliable place for electronics shopping in Hyderabad, offering a combination of good pricing, quality products, and strong customer support. I would definitely recommend them to others.Thank you KSP Electronics😊🤝
KSP provides very high customer satisfaction. Affordable prices. Fast billing and Free delivery 🚚
KSP Electronics provides good service for project kits. Delivery was fast and customer support was helpful. Overall a good experience for students and project work.
Best service ever and very resonable.Very happy to purchase electronics in KSP Electronics
I recently ordered the Bluetooth Home Automation IoT kit from KSP Electronics for a college project, and overall it was a good experience. Overall, I’m happy with the purchase. If you’re a student looking for IoT project kits, KSP Electronics is a decent option. Good support and reliable experience.
I had a great experience purchasing from KSP Electronics. The product quality was excellent, delivery was timely, and everything arrived in perfect condition. The overall service was smooth and reliable.Highly satisfied with my purchase—definitely recommended!
I purchased bambulab AMS lite and it's really good, owner is kind hearted
The product quality is consistently reliable, and the pricing reflects strong value for what is offered. What stands out most is the professionalism of the team—responsive, knowledgeable, and genuinely focused on customer needs. The entire process, from inquiry to delivery, was seamless and well-managed. KSP Electronic presents itself as a dependable and refined choice for quality electronic solutions.
Such an wonderful online site to get the worth products. I Bought many electronic items from this site.... Worth it.... !!!! Here you can also get 3D Printers.... Once you visit, you may never want to ignore it....
Its been wonderful journey value for money Huge potential in developing IOT kits and Digital Services
My project Home Automation is…
My project Home Automation is successful with faster delivery thanku
KSP is so much better as they are…
KSP is so much better as they are having good service and handing products in short time as well. I feel so glad to know about KSP and made me enthusiastic after seeing their work.
great and impressive service
the service of iot automation is very nice the hospitality and listening to the customer and making number of changes to the project and and taking the project points patiently i liked about this services overall great experience
Great service and polite communication
Great service and polite communication
Great customer service
Great customer service and polite communication with customer there delivery is fast and there response is to good regarding customer needs
I am extremely satisfied with KSP…
I am extremely satisfied with KSP Digital Solutions' exceptional service and expertise. Their team demonstrated a profound understanding of our project needs, delivering innovative solutions promptly. The communication was seamless, and the final results exceeded our expectations. KSP Digital Solutions is undoubtedly a reliable partner for any digital endeavor.KSP Electronics is overwhelmingly positive, praising their exceptional educational projects in IoT and Machine Learning. Users appreciate the hands-on approach that caters to diverse skill levels, making complex concepts accessible. The comprehensive educational kits and interactive online platform receive acclaim for enhancing the learning experience. Overall, feedback highlights KSP Electronics as a standout provider in the realm of technology education.
Great service
Great service, all IOT solutions at single place and quick delivery
The innovation aspects of the project…
The innovation aspects of the project is introduced new and creative solutions, technology and a user friendly interface that makes the iot system easy to understand navigate and operate by me and my batch by this project we had finished our mini and major projects successfully
Great service
Great service, product got from KSP electronics to Leeds in under 2 days, gave me technical help before order and when I had questions after delivery were available to speak to me in the evening well after closing time. Would highly recommend
Excellent Service & Kind Customer…
Excellent Service & Kind Customer Support
Innovative solutions for all the…
Innovative solutions for all the Requirements Value for money delivered on time with Promising Standards looking forward to close as many deals As I Can
Development Boards
ESP32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core (30 PIN)
In stock
| Weight | 0.11 kg |
|---|---|
| Dimensions | 8 × 4 × 10 cm |
| Chipset | ESP32-WROOM-32 |
| CPU | Dual-core Xtensa LX6, up to 240 MHz |
| WiFi | 802.11 b/g/n (2.4 GHz) |
| Bluetooth | Classic BT 4.2 + BLE |
| Flash Memory | 4 MB |
| SRAM | 520 KB |
| GPIO Pins | 30 |
| USB-Serial Chip | CP2102 |
| Operating Voltage | 3.3V |
| ADC | 12-bit, 18 channels |
| DAC | 8-bit, 2 channels |
| Interfaces | SPI, I2C, I2S, UART, PWM, Touch |
| Compatible IDEs | Arduino IDE, MicroPython, ESP-IDF, PlatformIO |
ESP32-CAM WiFi Bluetooth Development Board with OV2640 Camera Module
In stock
| Weight | 0.02 kg |
|---|---|
| Dimensions | 4.1 × 2.7 × 0.5 cm |
| Model | ESP32-CAM (AI-Thinker) |
| CPU | Dual-core Xtensa LX6, up to 240 MHz |
| Camera | OV2640 2MP (OV7670 compatible) |
| Wi-Fi | 802.11 b/g/n/e/i (2.4 GHz) |
| Bluetooth | 4.2 + BLE |
| RAM | 520 KB SRAM + 4 MB PSRAM |
| Flash | 32 Mbit (4 MB) |
| Storage | MicroSD (TF card) slot |
| Input Voltage | 3.6V – 5V |
| GPIO Pins | 9 |
| Antenna | IPEX + onboard PCB antenna |
| Operating Temp | -20°C to +80°C |
| Security | WPA/WPA2/WPA2-Enterprise/WPS |
| Dimensions | 41 × 27 × 5 mm |
| Compatible IDEs | Arduino IDE, ESP-IDF, MicroPython, PlatformIO |
Arduino Nano Development Board – Best ATmega328 Microcontroller for DIY Electronics
In stock
NodeMcu ESP8266 V3 Lua CH340 Wifi Development Board
In stock
Arduino Uno R3 Compatible Board – Best ATmega328 Microcontroller for DIY Projects
In stock
Arduino UNO R3 ATmega16U2 ATmega328 (DIP)
In stock
ESP32 Live D1 Mini Kit (WiFi + Bluetooth Dual Core CPU)
In stock
ESP8266 NodeMCU CP2102 Board
In stock
Components & Sensors
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
In stock
RC522 RFID Reader Writer SPI Module with Card & Tag
In stock
| Weight | 0.022 kg |
|---|---|
| Dimensions | 6 × 5 × 3 cm |
| Model | MFRC522 (NXP) |
| Operating Frequency | 13.56 MHz |
| Supply Voltage | 3.3V DC (do not use 5V) |
| Operating Current | 13 – 26 mA |
| Idle Current | 10 – 13 mA |
| Interface | SPI (up to 10 Mbit/s) |
| Read/Write Distance | Up to 50 mm |
| Protocol | ISO/IEC 14443A, MIFARE |
| FIFO Buffer | 64 bytes |
| Board Dimensions | 60 × 39.5 mm |
| Weight | 20 g |
| Compatible Boards | Arduino, ESP32, Raspberry Pi, NodeMCU |
ZTS-3002-TR-ECTHNPKPH-N01, Temperature, Moisture, PH, Conductivity, NPK, Five-Pin Soil Multi-Parameter Sensor (RS485 Type)
Available on backorder
DHT11 Humidity & Temperature Sensor (with PCB)
In stock
1602 (16×2) LCD Display with I2C/IIC interface – Green Backlight
In stock
Engineering Projects
MEMS Sensor-Controlled Robot with Video Surveillance Capability – Gesture-Controlled Innovation
In stock
Design and Fabrication of Prosthetic Hand – Mini & Major Engineering Project
Available on backorder
Accident prevention system using iot
Available on backorder
A Navigation and Reservation Based Smart Parking Platform Using Genetic Optimization for Smart Cities
Available on backorder
Smartphone controlled radar using arduino
Available on backorder
BLDC Motor Control and Monitoring System Using Custom ESC
Available on backorder
An Automatic and Manual Controlled Solar Powered Grass Cutter
Available on backorder
An IoT-Based Smart Water Quality Monitoring System Using Cloud
Available on backorder
Custom projects, built and supported end-to-end
Electronics, IoT, machine learning and app projects – designed, documented and supported by our Hyderabad team.
We discuss your goals and requirements and plan the right solution.
We confirm the design and details, then build and test your project.
We deliver with documentation and train you to use it confidently.
Trusted by Students From
Tutorials
From the Blog
Empowering Tomorrow's Innovators: KSP Electronics' IoT and ML Educational Projects and Kits
KSP Electronics is a leading provider of educational projects and kits, specializing in Internet of Things (IoT) and Machine Learning (ML). Their hands-on IoT projects span home automation to industrial monitoring, while ML projects cover image recognition and predictive analytics. Education kits, tailored for all skill levels, offer comprehensive learning experiences, complemented by an interactive online platform. KSP Electronics is committed to making technology education accessible globally, collaborating with institutions to inspire the next generation of innovators.
