Bambu Lab PA6-CF Filament 1.75mm 1kg
₹4,999 (Incl. GST)
We added you to this product's waitlist and we'll send you an email when the product is available.
Leave WaitlistThis product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
- GST invoice
- Official warranty
- Secure payment
- 7-day return on defects & transit damage
Buying for a business, school or lab? Get a GST invoice & bulk pricing.
WhatsApp us for a quote · sales@kspelectronics.in
Carbon-fibre reinforced PA6 nylon for very strong, stiff and heat-resistant functional parts.
- Strength: 151 MPa bending strength, 5460 MPa bending modulus
- Heat resistance: 186 °C heat deflection temperature
- Diameter / weight: 1.75 mm ± 0.03 mm, 1 kg on a reusable spool
- Print at: 260–290 °C nozzle, 80–100 °C bed, enclosed printer
- Note: Hardened steel nozzle required (0.2 mm not supported); not AMS compatible; dry before use
Bambu Lab PA6-CF Carbon Fibre Nylon Filament 1.75mm 1kg – Black
Bambu Lab PA6-CF is a carbon fibre (carbon fiber) reinforced PA6 (Nylon 6) filament, available in Black. The carbon fibre gives it very high stiffness and strength in dry environments, along with excellent heat and impact resistance. It is an ideal choice for jigs, fixtures, clamps, automotive and mechanical components, drone frames and other structural parts used in dry conditions.
Superior strength and stiffness
PA6-CF keeps its strength and stiffness in dry environments, making it ideal for load-bearing structural components.
| Standard PA-CF | Bambu PA6-CF | Improvement | |
|---|---|---|---|
| Bending strength (XY, dry) | 128 MPa | 151 MPa | +18% |
| Bending modulus (XY, dry) | 4420 MPa | 5460 MPa | +24% |
Impact and vibration resistance
Excellent impact resistance makes PA6-CF a good choice for parts that must withstand impacts, collisions and vibration. Prints become even tougher after more than a day in a humid environment.
Exceptional heat resistance
With a heat deflection temperature of 186 °C (0.45 MPa), PA6-CF handles heat far better than common filaments:
| Filament | Heat deflection temp. (0.45 MPa) |
|---|---|
| PLA Basic | 57 °C |
| PETG Basic | 71 °C |
| ABS | 87 °C |
| ASA | 100 °C |
| PC | 117 °C |
| PA6-CF | 186 °C |
| PAHT-CF | 194 °C |
| PET-CF | 205 °C |
PA6-CF vs other carbon-fibre nylons
| Bambu PA6-CF | Standard PA-CF | Bambu PAHT-CF | |
|---|---|---|---|
| Composition | Nylon 6, carbon fibre | PA12 and other long-chain PA, carbon fibre | — |
| AMS compatible | No | — | Yes |
| Impact strength (XY, dry / wet) | 40.3 / 57.2 kJ/m² | 35.7 / 65.4 kJ/m² | 57.5 / 62.3 kJ/m² |
| Bending strength (XY, dry / wet) | 151 / 95 MPa | 141 / 67 MPa | 125 / 115 MPa |
| Layer strength (Z, dry / wet) | 80 / 45 MPa | 72 / 31 MPa | 61 / 49 MPa |
| Bending modulus (XY, dry / wet) | 5460 / 3560 MPa | 4870 / 1890 MPa | 4230 / 3640 MPa |
| Layer adhesion (Z impact, dry) | 15.5 kJ/m² | 11.6 kJ/m² | 13.3 kJ/m² |
| Heat deflection (0.45 MPa) | 186 °C | 177 °C | 194 °C |
| Water absorption (25 °C, 55% RH) | 2.35% | 3.80% | 0.88% |
Specifications
| Brand | Bambu Lab |
|---|---|
| Material | PA6 (Nylon 6) + carbon fibre |
| Colour | Black |
| Diameter | 1.75 mm ± 0.03 mm |
| Net weight | 1 kg |
| Spool | Reusable high-temperature PC + ABS spool (90 °C), 200 mm dia. × 67 mm |
| Density | 1.09 g/cm³ |
| Melting temperature | 223 °C |
| Heat deflection temperature | 186 °C (0.45 MPa), 164 °C (1.8 MPa) |
| Tensile strength (XY / Z) | 102 / 48 MPa |
| Bending strength (XY / Z) | 151 / 80 MPa |
| Bending modulus (XY / Z) | 5460 / 2240 MPa |
| Impact strength (XY / Z) | 40.3 / 15.5 kJ/m² |
Recommended print settings
| Nozzle | Hardened steel, 0.4 / 0.6 (recommended) / 0.8 mm |
|---|---|
| Nozzle temperature | 260 – 290 °C |
| Bed temperature | 80 – 100 °C |
| Build plate | Engineering Plate, High Temperature Plate or Textured PEI Plate, with glue |
| Chamber temperature | 45 – 60 °C (enclosed printer) |
| Cooling fan | 0 – 60% |
| Print speed | < 100 mm/s |
| Retraction | 0.8 – 1.4 mm at 20 – 40 mm/s |
| Max overhang / bridge | ~70° / ~40 mm |
| Support material | Support for PA/PET |
| Drying | 80 °C for 8 – 12 h (blast drying oven), or 90 – 100 °C for 12 h on an X1 heatbed |
| Storage while printing | < 20% RH, sealed with desiccant |
| Annealing (optional) | 80 – 130 °C for 6 – 12 h |
Printing tips
- Not compatible with: any AMS unit, the Cool Plate SuperTack, or the 0.2 mm stainless steel hotend. Stainless steel nozzles are not recommended.
- Keep it dry: this filament absorbs moisture quickly. Put unused filament back in a sealed container with desiccant straight away, and dry it thoroughly before printing.
- Moisture and strength: damp prints lose some strength and stiffness but become tougher, so PA6-CF is not ideal for thin, long parts that must stay rigid in humid conditions.
- Remove supports within 2 hours: once supports absorb moisture they soften and become hard to remove. If they are stuck, dry the print, let it cool and then remove them.
- Seal the surface: coating prints with paint, wax or another waterproof finish slows water absorption and keeps them stiff.
- Safety: carbon fibre can produce fine, sharp fibres. Wear gloves when loading or unloading filament and when cutting or sanding prints, print in a well-ventilated room or with filtration, keep filament away from children and pets, and do not use prints for food contact.
Documents & Downloads
- Technical Data Sheet (TDS) – properties and recommended print settings (PDF)
- Safety Data Sheet (SDS) – handling, storage and safety information (PDF)
- RoHS Test Report – compliance report (PDF)
- Filament drying guide on the Bambu Lab Wiki
Frequently asked questions
What colours does Bambu Lab PA6-CF come in?
PA6-CF is available in Black only. If you need a coloured nylon, look at PA6-GF, which comes in Black, Gray, White, Orange and Blue.
What is the Bambu Lab PA6-CF price in India?
The current price is shown at the top of this page and includes GST. Every order comes with a GST invoice, and bulk pricing is available for businesses, colleges and labs.
Which printers can print PA6-CF?
Any printer that reaches 260–290 °C at the nozzle and is fitted with a hardened steel nozzle (0.4, 0.6 or 0.8 mm). An enclosed printer is strongly recommended because PA6-CF prints best with a 45–60 °C chamber, so the H2D, H2S, H2C, X1 and P1S/P2S series are a good fit. Open-frame printers such as the A1 and A1 mini are not recommended.
Can I load PA6-CF into the AMS?
No. PA6-CF is not compatible with any AMS unit (AMS, AMS 2 Pro, AMS HT or AMS lite). Feed it from an external spool holder or a filament dryer box. If you need a carbon-fibre nylon that works with the AMS, choose PAHT-CF instead.
Do I need to dry it before printing?
Yes, always. Nylon absorbs moisture very quickly, especially in humid Indian weather and during the monsoon. Dry it in a forced-air (blast) drying oven at 80 °C for 8–12 hours, or on an X1 series heatbed at 90–100 °C for 12 hours, and keep it below 20% RH in a sealed box with desiccant while printing. Wet filament causes stringing, bubbles and weak parts. Do not use a microwave or kitchen oven.
Which nozzle should I use?
A hardened steel nozzle; 0.6 mm is recommended, 0.4 and 0.8 mm also work. Carbon fibre wears out brass and stainless steel nozzles quickly, and the 0.2 mm nozzle is not supported because it clogs. We stock Bambu Lab hardened steel hotends.
Which build plate and settings should I use?
Use the Engineering Plate, High Temperature Plate or Textured PEI Plate with a thin layer of glue, a bed at 80–100 °C, the nozzle at 260–290 °C, cooling fan 0–60% and a print speed under 100 mm/s. In Bambu Studio, simply select the Bambu PA6-CF filament profile.
Why are my prints softer a day after printing?
PA6-CF absorbs water from the air after printing. Damp parts lose some strength and stiffness but become tougher and more impact resistant. For stiff, dimensionally stable parts, keep them dry or seal the surface with paint, wax or another waterproof coating. If a part needs maximum toughness, you can condition it in a humid environment on purpose.
Should I anneal PA6-CF parts?
Annealing improves heat resistance and stability. Bambu Lab suggests 80–130 °C for 6–12 hours in a forced-air oven. Results depend on part size and design, and some parts may warp, so test on a sample first.
PA6-CF or PAHT-CF – which should I buy?
Choose PA6-CF for the highest stiffness and strength in dry conditions (151 MPa bending strength, 5460 MPa bending modulus). Choose PAHT-CF for parts used in humid or wet environments, since it absorbs far less water (0.88% vs 2.35%) and works with the AMS.
Is PA6-CF food safe?
No. It is not food-grade, so do not use printed parts for food storage or contact.
Do I get a GST invoice?
Yes. Every order from KSP Electronics comes with a GST invoice, and you can claim input tax credit on business purchases.
Data from the Bambu Lab PA6-CF Technical Data Sheet (V3.0). Values are measured on standard test specimens and are for reference only. KSP Electronics is an authorized Bambu Lab reseller.
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Bambu Lab PLA Basic Filament 1.75mm 1kg
In stock
eSUN eVacuum Kit Pro 3 – Filament Vacuum Storage & Sealing System
In stock
Related Products
More from Bambu Lab
Bambu Lab PLA Basic Filament 1.75mm 1kg
In stock
Bambu Lab A1 3D Printer
In stock
Bambu Lab A1 Combo with AMS Lite
In stock
Bambu Lab P2S Combo 3D Printer
In stock
Bambu Lab A2L 3D Printer
In stock
Bambu Lab AMS 2 Pro
In stock
Bambu Lab A1 Mini Combo with AMS Lite
In stock

Reviews
Clear filtersThere are no reviews yet.