Showing 1–25 of 187 resultsSorted by popularity
Shop Electronics Online – KSP Electronics Hyderabad
Welcome to KSP Electronics online shop. Browse our full range of Arduino boards, Raspberry Pi, ESP32, STM32 development boards, IoT project kits, 3D printers, sensors, components and final year engineering project kits. All products are sourced from trusted manufacturers with genuine warranty. Fast pan-India shipping via Shiprocket.
Filter by Brand
18650 2500mAh Lithium-Ion Battery – Rechargeable 3.7V Cell
SKU:
KSP-18650-2500-37V
In stock
Original price was: ₹80.00.₹65.00Current price is: ₹65.00. (Incl. GST)| Weight | 0.045 kg |
|---|---|
| Dimensions | 6.7 × 1.8 × 1.8 cm |
Bambu Lab AMS Lite Automatic Material System for Multi-Color 3D Printing
SKU:
KSP-BL-AMS-LITE
In stock
Original price was: ₹24,999.00.₹23,249.07Current price is: ₹23,249.07. (Incl. GST)| Weight | 4.5 kg |
|---|---|
| Dimensions | 37 × 22 × 43 cm |
| Brand | Bambu LabHigh-speed 3D printers and AMS multi-color systems. |
Raspberry Pi 5 Model 4GB RAM
SKU:
KSP-RP-4GB
In stock
₹12,000.00 (Incl. GST)| Weight | 0.200 kg |
|---|---|
| Dimensions | 5 × 5 × 5 cm |
PLA PRO+ 3D Printer Filament – Daisy White
SKU:
KSP-FIL-PLA-DSWHT
In stock
Original price was: ₹1,000.00.₹699.00Current price is: ₹699.00. (Incl. GST)| Weight | 1.2 kg |
|---|---|
| Dimensions | 22 × 22 × 7 cm |
Spectra Symbol Flex Sensor FS-L-055-253-MP (80mm, 3.5″) – Male Pins Connector | Hand Gesture Bend Sensor – KSP Electronics
SKU:
KSP-SM-0001
In stock
Original price was: ₹550.00.₹480.00Current price is: ₹480.00. (Incl. GST)| Weight | 0.01 kg |
|---|---|
| Dimensions | 3.5 × 1 × 1 cm |
Bambu Lab A1 3D Printer | Auto Calibration | High-Speed Desktop 3D Printer
SKU:
KSP-BL-A1
In stock
₹31,999.00 (Incl. GST)| Weight | 12 kg |
|---|---|
| Dimensions | 60 × 54 × 33 cm |
| Build Volume | 256 x 256 x 256 mm |
| Max Bed Temp | 100 C |
| Supported Filaments | PLA, PETG, TPU, PVA: Ideal | ABS, ASA: Not recommended | PA, PC, PET: Not recommended | CF/GF: Not recommended |
| Shell Materials | Steel + Extruded Aluminum |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Stainless Steel |
| MC Board Cooling Fan | No |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | N/A |
| Air Filter | N/A |
| Filament Sensors | Run Out: Yes | Odometry: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | Low Rate (up to 1080P) | Timelapse Supported |
| Software Updates | Bugfixes until Dec 14, 2028 | Security until Dec 14, 2030 |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s2 |
| Physical Dimensions | 385 x 410 x 430 mm³ |
| Net Weight | 8.3 kg |
| Max Nozzle Temp | 300 C |
| Frame Design | Dual Z-Axis (Gantry) |
| Multi-Color Support | Yes (AMS Lite) |
| Display Screen | 3.5-inch 320×240 IPS Touch Screen |
| Connectivity | Wi-Fi, Bambu-Bus |
NodeMcu ESP8266 V3 Lua CH340 Wifi Development Board
SKU:
KSP-002
In stock
Original price was: ₹250.00.₹190.00Current price is: ₹190.00. (Incl. GST)| Weight | 0.100 kg |
|---|---|
| Dimensions | 5 × 5 × 5 cm |
MEMS Sensor-Controlled Robot with Video Surveillance Capability – Gesture-Controlled Innovation
SKU:
KSP-063
In stock
Original price was: ₹8,000.00.₹7,500.00Current price is: ₹7,500.00. (Incl. GST)| Weight | 0.8 kg |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
Official Raspberry Pi 5 27W USB-C PD Power Supply (White)
SKU:
KSP-RP-PSU-27W
In stock
Original price was: ₹1,450.00.₹1,350.00Current price is: ₹1,350.00. (Incl. GST)| Weight | 0.250 kg |
|---|---|
| Dimensions | 8 × 5 × 4 cm |
Arduino UNO R3 ATmega16U2 ATmega328 (DIP)
SKU:
KSP-ARD-UNO-R3-DIP
In stock
Original price was: ₹849.00.₹400.00Current price is: ₹400.00.| Weight | 0.100 kg |
|---|---|
| Dimensions | 10 × 10 × 5 cm |
170 Points Mini Breadboard
SKU:
KSP-BB-170
In stock
₹35.00 (Incl. GST)| Weight | 0.05 kg |
|---|---|
| Dimensions | 4.5 × 3.5 × 0.9 cm |
| Total Tie Points | 170 |
| Layout | 2 x 17 rows |
| Self-Adhesive | Yes |
| Pin Pitch | 2.54 mm |
| Dimensions | 45 x 35 x 9 mm |
| Weight | 50 g |
| Colour | May vary (red/blue/white/yellow) |
| Compatible | Arduino, ESP32, Raspberry Pi, NodeMCU |
FT232RL USB to TTL UART Serial Adapter Module 5V 3.3V
SKU:
KSP-USB-FT232RL
In stock
₹120.00 (Incl. GST)| Weight | 0.005 kg |
|---|---|
| Dimensions | 4 × 2.5 × 1.5 cm |
| IC Chip | FT232RL (FTDI) |
| Interface | Mini USB to 2.54 mm UART header |
| Voltage | 5V (default) / 3.3V (via solder jumper) |
| Pitch | 2.54 mm |
| USB Protection | 500 mA self-restore fuse |
| Indicators | Power, TX, RX LEDs |
| DTR Pin | Yes (auto-reset support) |
| Board Dimensions | 36 × 18 mm |
| Weight | 4 g |
| Compatible | Arduino Pro Mini, LilyPad, ESP8266 ESP-01, UART devices |
ESP32-CAM WiFi Bluetooth Development Board with OV2640 Camera Module
SKU:
KSP-ESP32-CAM
In stock
Original price was: ₹799.00.₹699.00Current price is: ₹699.00. (Incl. GST)| Weight | 0.02 kg |
|---|---|
| Dimensions | 4.1 × 2.7 × 0.5 cm |
| Model | ESP32-CAM (AI-Thinker) |
| CPU | Dual-core Xtensa LX6, up to 240 MHz |
| Camera | OV2640 2MP (OV7670 compatible) |
| Wi-Fi | 802.11 b/g/n/e/i (2.4 GHz) |
| Bluetooth | 4.2 + BLE |
| RAM | 520 KB SRAM + 4 MB PSRAM |
| Flash | 32 Mbit (4 MB) |
| Storage | MicroSD (TF card) slot |
| Input Voltage | 3.6V – 5V |
| GPIO Pins | 9 |
| Antenna | IPEX + onboard PCB antenna |
| Operating Temp | -20°C to +80°C |
| Security | WPA/WPA2/WPA2-Enterprise/WPS |
| Dimensions | 41 × 27 × 5 mm |
| Compatible IDEs | Arduino IDE, ESP-IDF, MicroPython, PlatformIO |
RC522 RFID Reader Writer SPI Module with Card & Tag
SKU:
KSP-RFID-RC522
In stock
₹120.00 (Incl. GST)| Weight | 0.022 kg |
|---|---|
| Dimensions | 6 × 5 × 3 cm |
| Model | MFRC522 (NXP) |
| Operating Frequency | 13.56 MHz |
| Supply Voltage | 3.3V DC (do not use 5V) |
| Operating Current | 13 – 26 mA |
| Idle Current | 10 – 13 mA |
| Interface | SPI (up to 10 Mbit/s) |
| Read/Write Distance | Up to 50 mm |
| Protocol | ISO/IEC 14443A, MIFARE |
| FIFO Buffer | 64 bytes |
| Board Dimensions | 60 × 39.5 mm |
| Weight | 20 g |
| Compatible Boards | Arduino, ESP32, Raspberry Pi, NodeMCU |
DuPont Jumper Wire Combo 40Pcs 20cm — Male/Male + Male/Female + Female/Female
SKU:
KSP-JW-COMBO4020
In stock
₹150.00 (Incl. GST)| Weight | 0.10 kg |
|---|---|
| Type | Combo (M/M + M/F + F/F) |
| Quantity | 120 pcs (40 pcs each type) |
| Length | 20 cm (200 mm) |
| Pitch | 2.54 mm |
| Colours | Assorted (40 colours per strip) |
| Connector | DuPont / 1P-1P |
| Total Weight | 90–105 g |
| Compatible | Arduino, Raspberry Pi, ESP32, NodeMCU, Breadboards |
Female to Female Jumper Wires 40Pcs 20cm
SKU:
KSP-JW-F2F4020
In stock
₹50.00 (Incl. GST)| Weight | 0.03 kg |
|---|---|
| Type | Female to Female (F2F) |
| Quantity | 40 pcs |
| Length | 20 cm (200 mm) |
| Pitch | 2.54 mm |
| Colours | Assorted (40 colours) |
| Connector | DuPont / 1P-1P |
| Weight | 30 g |
| Compatible | Arduino, Raspberry Pi, ESP32, NodeMCU, GPIO Boards |
Male to Male Jumper Wires 40Pcs 20cm
SKU:
KSP-JW-M2M4020
In stock
₹50.00 (Incl. GST)| Weight | 0.03 kg |
|---|---|
| Type | Male to Male (M2M) |
| Quantity | 40 pcs |
| Length | 20 cm (200 mm) |
| Pitch | 2.54 mm |
| Colours | Assorted (40 colours) |
| Connector | DuPont / 1P-1P |
| Weight | 30 g |
| Compatible | Arduino, Raspberry Pi, ESP32, NodeMCU, Breadboards |
Male to Female Jumper Wires 40Pcs 20cm
SKU:
KSP-JW-M2F4020
In stock
₹50.00 (Incl. GST)| Weight | 0.03 kg |
|---|---|
| Type | Male to Female (M2F) |
| Quantity | 40 pcs |
| Length | 20 cm (200 mm) |
| Pitch | 2.54 mm |
| Colours | Assorted (40 colours) |
| Connector | DuPont / 1P-1P |
| Weight | 30 g |
| Compatible | Arduino, Raspberry Pi, ESP32, NodeMCU, Breadboards |
Bambu PLA Basic – Jade White
SKU:
KSP-BAMBU-PLA-BASIC-JA-30835
In stock
Price range: ₹1,099.00 through ₹1,699.00 (Incl. GST)| Coloron | Jade White |
|---|---|
| Type | Filament with spool, Refill |
Select options
This product has multiple variants. The options may be chosen on the product page
Bambu Lab X2dc 3D Printer with AMS | Multi-Color High-Speed CoreXY
SKU:
KSP-BL-X2DC
In stock
₹132,999.00 (Incl. GST)
Bambu Lab X2d 3D Printer | Next-Gen High-Speed CoreXY
SKU:
KSP-BL-X2D
In stock
₹98,999.00 (Incl. GST)
Bambu Lab H2C Combo 2 40W 3D Printer | Multi-Color + 40W Laser
SKU:
KSP-H2CL-40W
In stock
₹452,999.00 (Incl. GST)
Bambu Lab P2S 3D Printer
SKU:
KSP-BL-P2S
In stock
₹71,999.00 (Incl. GST)| Weight | 14.9 kg |
|---|---|
| Dimensions | 39.2 × 40.6 × 47.8 cm |
| Shell Materials | Plastic, Glass and Steel |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Hardened Steel |
| Max Bed Temp | 110 C |
| MC Board Cooling Fan | No |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | Activated Carbon Filter |
| Filament Sensors | Run Out: Yes | Grinding Sensor: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | 1920*1080 high-rate | Timelapse Supported |
| Supported Filaments | PLA, PETG, ABS, ASA, TPU, Support for PLA/PETG/ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF: Supported |
| Software Updates | Bugfixes until Oct 14, 2030 | Security until Oct 14, 2032 |
| Physical Dimensions | 392 × 406 × 478 mm³ |
| Net Weight | 14.9 kg |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 20,000 mm/s2 |
| Build Volume | 256 x 256 x 256 mm |
| Max Nozzle Temp | 300 C |
| Frame Design | CoreXY (Fully Enclosed) |
| Display Screen | 5-inch 854×480 Touchscreen |
| Connectivity | Wifi (5G & 2.4G), Bambu-Bus | 8 GB EMMC, USB Port | 2 TOPS NPU |
| Multi-Color Support | Upgradable (AMS 2 Pro) |
Bambu Lab P2S Combo 3D Printer
SKU:
KSP-BL-P2S-COMBO
In stock
₹102,999.00 (Incl. GST)| Weight | 14.9 kg |
|---|---|
| Dimensions | 39.2 × 40.6 × 47.8 cm |
| Shell Materials | Plastic, Glass and Steel |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Hardened Steel |
| Max Bed Temp | 110 C |
| MC Board Cooling Fan | No |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | Activated Carbon Filter |
| Filament Sensors | Run Out: Yes | Grinding Sensor: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | 1920*1080 high-rate | Timelapse Supported |
| Supported Filaments | PLA, PETG, ABS, ASA, TPU, Support for PLA/PETG/ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF: Supported |
| Software Updates | Bugfixes until Oct 14, 2030 | Security until Oct 14, 2032 |
| Physical Dimensions | 392 × 406 × 478 mm³ |
| Net Weight | 14.9 kg |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 20,000 mm/s2 |
| Build Volume | 256 x 256 x 256 mm |
| Max Nozzle Temp | 300 C |
| Frame Design | CoreXY (Fully Enclosed) |
| Display Screen | 5-inch 854×480 Touchscreen |
| Connectivity | Wifi (5G & 2.4G), Bambu-Bus | 8 GB EMMC, USB Port | 2 TOPS NPU |
| Multi-Color Support | Yes (AMS 2 Pro) |
Bambu Lab H2C Combo 3D Printer | Multi-Color High-Speed 3D Printer
SKU:
KSP-BL-H2C-COMBO
In stock
₹309,999.00 (Incl. GST)
