IoT Projects
ML Projects
Training
Showing 1–24 of 112 resultsSorted by popularity
Shop Electronics Online – KSP Electronics Hyderabad
Welcome to KSP Electronics online shop. Browse our full range of Arduino boards, Raspberry Pi, ESP32, STM32 development boards, IoT project kits, 3D printers, sensors, components and final year engineering project kits. All products are sourced from trusted manufacturers with genuine warranty. Fast pan-India shipping via Shiprocket.
-11%
18650 2500mAh Lithium-Ion Battery – Rechargeable 3.7V Cell
In stock
Original price was: ₹95.00.₹85.00Current price is: ₹85.00. (Incl. GST)| Weight | 0.045 kg |
|---|---|
| Dimensions | 6.7 × 1.8 × 1.8 cm |
-11%
ESP32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core (30 PIN)
In stock
Original price was: ₹450.00.₹400.00Current price is: ₹400.00. (Incl. GST)| Weight | 0.11 kg |
|---|---|
| Dimensions | 8 × 4 × 10 cm |
| Chipset | ESP32-WROOM-32 |
| CPU | Dual-core Xtensa LX6, up to 240 MHz |
| WiFi | 802.11 b/g/n (2.4 GHz) |
| Bluetooth | Classic BT 4.2 + BLE |
| Flash Memory | 4 MB |
| SRAM | 520 KB |
| GPIO Pins | 30 |
| USB-Serial Chip | CP2102 |
| Operating Voltage | 3.3V |
| ADC | 12-bit, 18 channels |
| DAC | 8-bit, 2 channels |
| Interfaces | SPI, I2C, I2S, UART, PWM, Touch |
| Compatible IDEs | Arduino IDE, MicroPython, ESP-IDF, PlatformIO |
-11%
ESP32-CAM WiFi Bluetooth Development Board with OV2640 Camera Module
In stock
Original price was: ₹950.00.₹850.00Current price is: ₹850.00. (Incl. GST)| Weight | 0.02 kg |
|---|---|
| Dimensions | 4.1 × 2.7 × 0.5 cm |
| Model | ESP32-CAM (AI-Thinker) |
| CPU | Dual-core Xtensa LX6, up to 240 MHz |
| Camera | OV2640 2MP (OV7670 compatible) |
| Wi-Fi | 802.11 b/g/n/e/i (2.4 GHz) |
| Bluetooth | 4.2 + BLE |
| RAM | 520 KB SRAM + 4 MB PSRAM |
| Flash | 32 Mbit (4 MB) |
| Storage | MicroSD (TF card) slot |
| Input Voltage | 3.6V – 5V |
| GPIO Pins | 9 |
| Antenna | IPEX + onboard PCB antenna |
| Operating Temp | -20°C to +80°C |
| Security | WPA/WPA2/WPA2-Enterprise/WPS |
| Dimensions | 41 × 27 × 5 mm |
| Compatible IDEs | Arduino IDE, ESP-IDF, MicroPython, PlatformIO |
-40%
Arduino Nano Development Board – Best ATmega328 Microcontroller for DIY Electronics
In stock
Original price was: ₹350.00.₹210.00Current price is: ₹210.00. (Incl. GST)| Weight | 0.01 kg |
|---|---|
| Dimensions | 8 × 6 × 2 cm |
| Brand | Generic (Arduino Compatible) |
| Microcontroller | ATmega328P |
| USB Interface | CH340 (Mini USB) |
| Operating Voltage | 5V |
| Digital I/O Pins | 14 (6 PWM) |
| Analog Input Pins | 8 (A0–A7) |
| Flash Memory | 32 KB |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| Clock Speed | 16 MHz |
RC522 RFID Reader Writer SPI Module with Card & Tag
In stock
₹120.00 (Incl. GST)| Weight | 0.022 kg |
|---|---|
| Dimensions | 6 × 5 × 3 cm |
| Model | MFRC522 (NXP) |
| Operating Frequency | 13.56 MHz |
| Supply Voltage | 3.3V DC (do not use 5V) |
| Operating Current | 13 – 26 mA |
| Idle Current | 10 – 13 mA |
| Interface | SPI (up to 10 Mbit/s) |
| Read/Write Distance | Up to 50 mm |
| Protocol | ISO/IEC 14443A, MIFARE |
| FIFO Buffer | 64 bytes |
| Board Dimensions | 60 × 39.5 mm |
| Weight | 20 g |
| Compatible Boards | Arduino, ESP32, Raspberry Pi, NodeMCU |
DuPont Jumper Wire Combo 40Pcs 20cm — Male/Male + Male/Female + Female/Female
In stock
₹150.00 (Incl. GST)| Weight | 0.10 kg |
|---|---|
| Dimensions | 14 × 10 × 3 cm |
| Type | Combo (M/M + M/F + F/F) |
| Quantity | 120 pcs (40 pcs each type) |
| Length | 20 cm (200 mm) |
| Pitch | 2.54 mm |
| Colours | Assorted (40 colours per strip) |
| Connector | DuPont / 1P-1P |
| Total Weight | 90–105 g |
| Compatible | Arduino, Raspberry Pi, ESP32, NodeMCU, Breadboards |
-15%
MB102 830 Points Solderless Breadboard – Best for Prototyping Circuits
In stock
Original price was: ₹100.00.₹85.00Current price is: ₹85.00. (Incl. GST)| Weight | 0.1 kg |
|---|---|
| Dimensions | 16.5 × 5.5 × 1 cm |
170 Points Mini Breadboard
In stock
₹35.00 (Incl. GST)| Weight | 0.05 kg |
|---|---|
| Dimensions | 4.5 × 3.5 × 0.9 cm |
| Total Tie Points | 170 |
| Layout | 2 x 17 rows |
| Self-Adhesive | Yes |
| Pin Pitch | 2.54 mm |
| Dimensions | 45 x 35 x 9 mm |
| Weight | 50 g |
| Colour | May vary (red/blue/white/yellow) |
| Compatible | Arduino, ESP32, Raspberry Pi, NodeMCU |
-50%
TP4056 Type-C 5V 1A Lithium Battery Charger Board – Safe Li-ion Charging
In stock
Original price was: ₹40.00.₹20.00Current price is: ₹20.00. (Incl. GST)| Weight | 0.005 kg |
|---|---|
| Dimensions | 5 × 3 × 1 cm |
-48%
DHT11 Humidity & Temperature Sensor (with PCB)
In stock
Original price was: ₹125.00.₹65.00Current price is: ₹65.00. (Incl. GST)| Weight | 0.01 kg |
|---|---|
| Dimensions | 6 × 4 × 2 cm |
-40%
1602 (16×2) LCD Display with I2C/IIC interface – Green Backlight
In stock
Original price was: ₹300.00.₹180.00Current price is: ₹180.00. (Incl. GST)| Weight | 0.2 kg |
|---|---|
| Dimensions | 5 × 5 × 5 cm |
Female to Female Jumper Wires 40Pcs 20cm
In stock
₹50.00 (Incl. GST)| Weight | 0.03 kg |
|---|---|
| Dimensions | 12 × 8 × 2 cm |
| Type | Female to Female (F2F) |
| Quantity | 40 pcs |
| Length | 20 cm (200 mm) |
| Pitch | 2.54 mm |
| Colours | Assorted (40 colours) |
| Connector | DuPont / 1P-1P |
| Weight | 30 g |
| Compatible | Arduino, Raspberry Pi, ESP32, NodeMCU, GPIO Boards |
-24%
NodeMcu ESP8266 V3 Lua CH340 Wifi Development Board
In stock
Original price was: ₹250.00.₹190.00Current price is: ₹190.00. (Incl. GST)| Weight | 0.100 kg |
|---|---|
| Dimensions | 5 × 5 × 5 cm |
LM2596S DC-DC Step-Down Buck Converter with SMD LED | Adjustable Power Supply Module
In stock
₹45.00 (Incl. GST)| Weight | 0.01 kg |
|---|---|
| Dimensions | 6 × 4 × 2 cm |
| Brand | Generic |
| IC | LM2596S |
| Input Voltage | 3V – 40V |
| Output Voltage | 1.5V – 35V (Adjustable) |
| Output Current | 2A rated, 3A max |
| Switching Frequency | 150 kHz |
| Efficiency | 92% (max) |
| Operating Temp | -40°C to +85°C |
Male to Female Jumper Wires 40Pcs 20cm
In stock
₹50.00 (Incl. GST)| Weight | 0.03 kg |
|---|---|
| Dimensions | 12 × 8 × 2 cm |
| Type | Male to Female (M2F) |
| Quantity | 40 pcs |
| Length | 20 cm (200 mm) |
| Pitch | 2.54 mm |
| Colours | Assorted (40 colours) |
| Connector | DuPont / 1P-1P |
| Weight | 30 g |
| Compatible | Arduino, Raspberry Pi, ESP32, NodeMCU, Breadboards |
-7%
Official 27W USB-C PD Power Supply for Raspberry Pi 5 – White (Plug Type: IN)
In stock
Original price was: ₹1,450.00.₹1,350.00Current price is: ₹1,350.00. (Incl. GST)| Weight | 0.250 kg |
|---|---|
| Dimensions | 8 × 5 × 4 cm |
| Brand | Raspberry Pi |
| Compatibility | Raspberry Pi 5 |
| Input Voltage | 100–240 VAC |
| Plug Type | IN (Indian) |
| Output | 5A @ 5.1V / 3A @ 9V / 2.25A @ 12V / 1.8A @ 15V |
| Max Output Power | 27W |
| Connector Type | USB-C |
| Cable Type | 1.2m, 18 AWG |
| Color | White |
| Country of Origin | United Kingdom |
-6% Bestseller
Bambu Lab A1 3D Printer | Auto Calibration | High-Speed Desktop 3D Printer
In stock
Original price was: ₹31,999.00.₹29,999.00Current price is: ₹29,999.00. (Incl. GST)| Weight | 12 kg |
|---|---|
| Dimensions | 60 × 54 × 33 cm |
| Build Volume | 256 × 256 × 256 mm |
| Max Bed Temp | 100 °C |
| Supported Filaments | PLA, PETG, TPU, PVA: Ideal | ABS, ASA: Not recommended | PA, PC, PET: Not recommended | CF/GF: Not recommended |
| Shell Materials | Steel + Extruded Aluminum |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Stainless Steel |
| MC Board Cooling Fan | No |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | N/A |
| Air Filter | N/A |
| Filament Sensors | Run Out: Yes | Odometry: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | Low Rate (up to 1080P) | Timelapse Supported |
| Software Updates | Bugfixes until Dec 14, 2028 | Security until Dec 14, 2030 |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s² |
| Physical Dimensions | 385 x 410 x 430 mm³ |
| Net Weight | 8.3 kg |
| Max Nozzle Temp | 300 °C |
| Frame Design | Dual Z-Axis (Gantry) |
| Multi-Color Support | Yes (AMS Lite) |
| Display Screen | 3.5-inch 320×240 IPS Touch Screen |
| Connectivity | Wi-Fi, Bambu-Bus |
-72%
Arduino Uno R3 Compatible Board – Best ATmega328 Microcontroller for DIY Projects
In stock
Original price was: ₹900.00.₹250.00Current price is: ₹250.00. (Incl. GST)| Weight | 0.025 kg |
|---|---|
| Dimensions | 10 × 8 × 3 cm |
| Brand | Generic (Arduino Compatible) |
| Microcontroller | ATmega328P |
| USB Interface | CH340 |
| Operating Voltage | 5V |
| Digital I/O Pins | 14 (6 PWM) |
| Analog Input Pins | 6 |
| Flash Memory | 32 KB |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| Clock Speed | 16 MHz |
Bestseller
Bambu Lab A2L Combo 3D Printer | Extra Large Build Volume | AMS Multi-Color
In stock
₹65,999.00 (Incl. GST)| Weight | 18 kg |
|---|---|
| Dimensions | 62 × 56 × 48 cm |
| Build Volume | 330 × 320 × 325 mm |
| Physical Dimensions | 544 × 529 × 505 mm |
| Net Weight | 12.8 kg |
| Max Nozzle Temp | 300 °C |
| Max Bed Temp | 80 °C |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s² |
| Nozzle Material | Stainless Steel |
| Extruder Gears | Hardened Steel |
| Shell Materials | Aluminum & Steel chassis, Plastic frame |
| Supported Filaments | PLA, PETG, TPU, PVA; PLA-CF, PETG-CF (with hardened nozzle) |
| Chamber Camera | Low-frame-rate, up to 1080p, timelapse |
| Filament Sensors | Run-out, Tangle, Odometry & Clumping detection |
| Display Screen | 3.5-inch 240×320 Touchscreen |
| Connectivity | 2.4 GHz Wi-Fi, Bambu-Bus |
| Frame Design | A-series Multi-Tool (with Cutting Module) |
| Software Updates | Bambu Studio (OTA) |
| Model Name | A2L Combo |
| Multi-Color Support | Yes — includes AMS |
-28%
SanDisk 64GB microSD Card – High-Speed Class 10 Memory for Raspberry Pi
In stock
Original price was: ₹2,000.00.₹1,450.00Current price is: ₹1,450.00. (Incl. GST)| Weight | 0.02 kg |
|---|---|
| Dimensions | 9 × 6 × 5 cm |
| Brand | SanDisk |
| Model | Ultra microSDXC UHS-I |
| Storage Capacity | 64GB |
| Card Type | microSDXC |
| Speed Class | Class 10, UHS-I (U1) |
| App Performance | A1 |
| Max Read Speed | Up to 140MB/s |
| File System | exFAT (pre-formatted) |
| Compatibility | Raspberry Pi 3/4/5, Smartphones, Cameras, Embedded Boards |
| In The Box | 1x microSD Card, 1x SD Card Adapter |
| Warranty | 5 Years (Manufacturer) |
| Country of Origin | Imported |
