Showing 1–25 of 187 resultsSorted by average rating
Shop Electronics Online – KSP Electronics Hyderabad
Welcome to KSP Electronics online shop. Browse our full range of Arduino boards, Raspberry Pi, ESP32, STM32 development boards, IoT project kits, 3D printers, sensors, components and final year engineering project kits. All products are sourced from trusted manufacturers with genuine warranty. Fast pan-India shipping via Shiprocket.
Filter by Brand
Bambu Lab AMS Lite Automatic Material System for Multi-Color 3D Printing
In stock
Original price was: ₹24,999.00.₹23,249.07Current price is: ₹23,249.07. (Incl. GST)
SKU:
KSP-BL-AMS-LITE
Bambu Lab A1 Mini Combo with AMS Lite | Multi-Color Compact 3D Printer
In stock
₹38,499.00 (Incl. GST)
SKU:
KSP-BL-A1MINI-COMBO
| Weight | 15 kg |
|---|---|
| Dimensions | 58 × 53 × 42 cm |
| Build Volume | 180 x 180 x 180 mm |
| Max Bed Temp | 80 C |
| Supported Filaments | PLA, PETG, TPU, PVA: Ideal | ABS, ASA: Not recommended | PA, PC, PET: Not recommended | CF/GF: Not recommended |
| Shell Materials | Steel + Extruded Aluminum |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Stainless Steel |
| MC Board Cooling Fan | Closed Loop Control |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | N/A |
| Air Filter | N/A |
| Filament Sensors | Run Out: Yes | Odometry: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | Low Rate (up to 1080P) | Timelapse Supported |
| Software Updates | Bugfixes until Sep 20, 2028 | Security until Sep 20, 2030 |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s2 |
| Physical Dimensions | 347 x 315 x 365 mm³ |
| Net Weight | 5.5 kg |
| Max Nozzle Temp | 300 C |
| Frame Design | Single Z-Axis (Cantilever) |
| Multi-Color Support | Yes (AMS Lite) |
| Display Screen | 2.4-inch 320×240 IPS Touch Screen |
| Connectivity | Wi-Fi, Bambu-Bus |
Bambu Lab A1 3D Printer | Auto Calibration | High-Speed Desktop 3D Printer
In stock
₹31,999.00 (Incl. GST)
SKU:
KSP-BL-A1
| Weight | 12 kg |
|---|---|
| Dimensions | 60 × 54 × 33 cm |
| Build Volume | 256 x 256 x 256 mm |
| Max Bed Temp | 100 C |
| Supported Filaments | PLA, PETG, TPU, PVA: Ideal | ABS, ASA: Not recommended | PA, PC, PET: Not recommended | CF/GF: Not recommended |
| Shell Materials | Steel + Extruded Aluminum |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Stainless Steel |
| MC Board Cooling Fan | No |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | N/A |
| Air Filter | N/A |
| Filament Sensors | Run Out: Yes | Odometry: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | Low Rate (up to 1080P) | Timelapse Supported |
| Software Updates | Bugfixes until Dec 14, 2028 | Security until Dec 14, 2030 |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s2 |
| Physical Dimensions | 385 x 410 x 430 mm³ |
| Net Weight | 8.3 kg |
| Max Nozzle Temp | 300 C |
| Frame Design | Dual Z-Axis (Gantry) |
| Multi-Color Support | Yes (AMS Lite) |
| Display Screen | 3.5-inch 320×240 IPS Touch Screen |
| Connectivity | Wi-Fi, Bambu-Bus |
Bambu Lab H2S Combo 3D Printer | Multi-Color High-Speed 3D Printer
In stock
₹176,999.00 (Incl. GST)
SKU:
KSP-BL-H2S-AMS-COMBO
Bambu Lab A1 Mini Textured PEI Plate | Spring Steel Build Plate
In stock
Original price was: ₹5,500.00.₹4,500.00Current price is: ₹4,500.00. (Incl. GST)
SKU:
KSP-BL-A1MINI-PEI-TEX
Official Raspberry Pi 5 27W USB-C PD Power Supply (White)
In stock
Original price was: ₹1,450.00.₹1,350.00Current price is: ₹1,350.00. (Incl. GST)
SKU:
KSP-RP-PSU-27W
Bambu Lab A1 Mini 3D Printer | Compact High-Speed 3D Printer
In stock
₹21,499.00 (Incl. GST)
SKU:
KSP-BL-A1MINI
| Weight | 9 kg |
|---|---|
| Dimensions | 47 × 43 × 38 cm |
| Build Volume | 180 x 180 x 180 mm |
| Max Bed Temp | 80 C |
| Supported Filaments | PLA, PETG, TPU, PVA: Ideal | ABS, ASA: Not recommended | PA, PC, PET: Not recommended | CF/GF: Not recommended |
| Shell Materials | Steel + Extruded Aluminum |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Stainless Steel |
| MC Board Cooling Fan | Closed Loop Control |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | N/A |
| Air Filter | N/A |
| Filament Sensors | Run Out: Yes | Odometry: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | Low Rate (up to 1080P) | Timelapse Supported |
| Software Updates | Bugfixes until Sep 20, 2028 | Security until Sep 20, 2030 |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s2 |
| Physical Dimensions | 347 x 315 x 365 mm³ |
| Net Weight | 5.5 kg |
| Max Nozzle Temp | 300 C |
| Frame Design | Single Z-Axis (Cantilever) |
| Multi-Color Support | Yes (AMS Lite) |
| Display Screen | 2.4-inch 320×240 IPS Touch Screen |
| Connectivity | Wi-Fi, Bambu-Bus |
18650 2500mAh Lithium-Ion Battery – Rechargeable 3.7V Cell
In stock
Original price was: ₹80.00.₹65.00Current price is: ₹65.00. (Incl. GST)
SKU:
KSP-18650-2500-37V
Spectra Symbol Flex Sensor FS-L-055-253-MP (80mm, 3.5″) – Male Pins Connector | Hand Gesture Bend Sensor – KSP Electronics
In stock
Original price was: ₹550.00.₹480.00Current price is: ₹480.00. (Incl. GST)
SKU:
KSP-SM-0001
NodeMcu ESP8266 V3 Lua CH340 Wifi Development Board
In stock
Original price was: ₹250.00.₹190.00Current price is: ₹190.00. (Incl. GST)
SKU:
KSP-002
FT232RL USB to TTL UART Serial Adapter Module 5V 3.3V
In stock
₹120.00 (Incl. GST)
SKU:
KSP-USB-FT232RL
| Weight | 0.005 kg |
|---|---|
| Dimensions | 4 × 2.5 × 1.5 cm |
| IC Chip | FT232RL (FTDI) |
| Interface | Mini USB to 2.54 mm UART header |
| Voltage | 5V (default) / 3.3V (via solder jumper) |
| Pitch | 2.54 mm |
| USB Protection | 500 mA self-restore fuse |
| Indicators | Power, TX, RX LEDs |
| DTR Pin | Yes (auto-reset support) |
| Board Dimensions | 36 × 18 mm |
| Weight | 4 g |
| Compatible | Arduino Pro Mini, LilyPad, ESP8266 ESP-01, UART devices |
ESP32-CAM WiFi Bluetooth Development Board with OV2640 Camera Module
In stock
Original price was: ₹799.00.₹699.00Current price is: ₹699.00. (Incl. GST)
SKU:
KSP-ESP32-CAM
| Weight | 0.02 kg |
|---|---|
| Dimensions | 4.1 × 2.7 × 0.5 cm |
| Model | ESP32-CAM (AI-Thinker) |
| CPU | Dual-core Xtensa LX6, up to 240 MHz |
| Camera | OV2640 2MP (OV7670 compatible) |
| Wi-Fi | 802.11 b/g/n/e/i (2.4 GHz) |
| Bluetooth | 4.2 + BLE |
| RAM | 520 KB SRAM + 4 MB PSRAM |
| Flash | 32 Mbit (4 MB) |
| Storage | MicroSD (TF card) slot |
| Input Voltage | 3.6V – 5V |
| GPIO Pins | 9 |
| Antenna | IPEX + onboard PCB antenna |
| Operating Temp | -20°C to +80°C |
| Security | WPA/WPA2/WPA2-Enterprise/WPS |
| Dimensions | 41 × 27 × 5 mm |
| Compatible IDEs | Arduino IDE, ESP-IDF, MicroPython, PlatformIO |
RC522 RFID Reader Writer SPI Module with Card & Tag
In stock
₹120.00 (Incl. GST)
SKU:
KSP-RFID-RC522
| Weight | 0.022 kg |
|---|---|
| Dimensions | 6 × 5 × 3 cm |
| Model | MFRC522 (NXP) |
| Operating Frequency | 13.56 MHz |
| Supply Voltage | 3.3V DC (do not use 5V) |
| Operating Current | 13 – 26 mA |
| Idle Current | 10 – 13 mA |
| Interface | SPI (up to 10 Mbit/s) |
| Read/Write Distance | Up to 50 mm |
| Protocol | ISO/IEC 14443A, MIFARE |
| FIFO Buffer | 64 bytes |
| Board Dimensions | 60 × 39.5 mm |
| Weight | 20 g |
| Compatible Boards | Arduino, ESP32, Raspberry Pi, NodeMCU |
DuPont Jumper Wire Combo 40Pcs 20cm — Male/Male + Male/Female + Female/Female
In stock
₹150.00 (Incl. GST)
SKU:
KSP-JW-COMBO4020
Bambu PLA Basic – Jade White
In stock
Price range: ₹1,099.00 through ₹1,699.00 (Incl. GST)
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
KSP-BAMBU-PLA-BASIC-JA-30835
| Coloron | Jade White |
|---|---|
| Type | Filament with spool, Refill |
Bambu Lab X2dc 3D Printer with AMS | Multi-Color High-Speed CoreXY
In stock
₹132,999.00 (Incl. GST)
SKU:
KSP-BL-X2DC
Bambu Lab X2d 3D Printer | Next-Gen High-Speed CoreXY
In stock
₹98,999.00 (Incl. GST)
SKU:
KSP-BL-X2D
Bambu Lab H2C Combo 2 40W 3D Printer | Multi-Color + 40W Laser
In stock
₹452,999.00 (Incl. GST)
SKU:
KSP-H2CL-40W
Bambu Lab P2S 3D Printer
In stock
₹71,999.00 (Incl. GST)
SKU:
KSP-BL-P2S
| Weight | 14.9 kg |
|---|---|
| Dimensions | 39.2 × 40.6 × 47.8 cm |
| Shell Materials | Plastic, Glass and Steel |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Hardened Steel |
| Max Bed Temp | 110 C |
| MC Board Cooling Fan | No |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | Activated Carbon Filter |
| Filament Sensors | Run Out: Yes | Grinding Sensor: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | 1920*1080 high-rate | Timelapse Supported |
| Supported Filaments | PLA, PETG, ABS, ASA, TPU, Support for PLA/PETG/ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF: Supported |
| Software Updates | Bugfixes until Oct 14, 2030 | Security until Oct 14, 2032 |
| Physical Dimensions | 392 × 406 × 478 mm³ |
| Net Weight | 14.9 kg |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 20,000 mm/s2 |
| Build Volume | 256 x 256 x 256 mm |
| Max Nozzle Temp | 300 C |
| Frame Design | CoreXY (Fully Enclosed) |
| Display Screen | 5-inch 854×480 Touchscreen |
| Connectivity | Wifi (5G & 2.4G), Bambu-Bus | 8 GB EMMC, USB Port | 2 TOPS NPU |
| Multi-Color Support | Upgradable (AMS 2 Pro) |
Bambu Lab P2S Combo 3D Printer
In stock
₹102,999.00 (Incl. GST)
SKU:
KSP-BL-P2S-COMBO
| Weight | 14.9 kg |
|---|---|
| Dimensions | 39.2 × 40.6 × 47.8 cm |
| Shell Materials | Plastic, Glass and Steel |
| Extruder Gears | Hardened Steel |
| Nozzle Material | Hardened Steel |
| Max Bed Temp | 110 C |
| MC Board Cooling Fan | No |
| Chamber Regulator Fan | N/A |
| Aux Cooling Fan | Closed Loop Control |
| Air Filter | Activated Carbon Filter |
| Filament Sensors | Run Out: Yes | Grinding Sensor: Yes | Power Loss Recover: Yes | Tangle Sensor: Yes | Micro Lidar: No |
| Chamber Camera | 1920*1080 high-rate | Timelapse Supported |
| Supported Filaments | PLA, PETG, ABS, ASA, TPU, Support for PLA/PETG/ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF: Supported |
| Software Updates | Bugfixes until Oct 14, 2030 | Security until Oct 14, 2032 |
| Physical Dimensions | 392 × 406 × 478 mm³ |
| Net Weight | 14.9 kg |
| Max Print Speed | 500 mm/s |
| Max Acceleration | 20,000 mm/s2 |
| Build Volume | 256 x 256 x 256 mm |
| Max Nozzle Temp | 300 C |
| Frame Design | CoreXY (Fully Enclosed) |
| Display Screen | 5-inch 854×480 Touchscreen |
| Connectivity | Wifi (5G & 2.4G), Bambu-Bus | 8 GB EMMC, USB Port | 2 TOPS NPU |
| Multi-Color Support | Yes (AMS 2 Pro) |
